Threat Level: green Handler on Duty: Johannes Ullrich

SANS ISC: Running Snort on ESXi using the Distributed Switch - SANS Internet Storm Center SANS ISC InfoSec Forums


Sign Up for Free!   Forgot Password?
Log In or Sign Up for Free!
Running Snort on ESXi using the Distributed Switch
This is a guest diary contributed by Basil Alawi

In a previous diary I wrote about running snort on Vmware ESXi[1] . While that setup might be suitable for small setup with one ESXi host, it might be not suitable for larger implementations with multiple VSphere hosts. In this diary I will discuss deploying Snort on larger implementation with SPAN/Mirror ports.

SPAN ports require VMware Distributed Switch (dvSwitch) or Cisco Nexus 1000v. VMware dvSwich is available with VMware VSphere Enterprise Plus while Cisco Nexus 1000v is third party add-on. Both solutions required VSphere Enterprise Plus and VMware vCenter.

Test Lab

The test lab consists of Vmware ESXi 5.1 as host, VMware vCenter 5.1, Kali Linux, Security Onion and Metaspoitable VM. ESXi 5.1 will be the host system and Kali VM will be the attack server, while Metaspoitable will be the target and Security Onion will run the snort instance. (Figure 1).

Figure 1

Figure 1(Test Lab)

Configuring dvSwitch:

 

 The VMware vDS extends the feature set of the VMware Standard Switch, while simplifying network provisioning, monitoring, and management through an abstracted, single distributed switch representation of multiple VMware ESX and ESXi Servers in a VMware data center[2].

To configure the SPAN ports on VMware dvSwitch :

1.     Log in to the vSphere Client and select the Networking inventory view

2.     Right-click the vSphere distributed switch in the inventory pane, and select Edit Settings (Figure 2)

Figure 2

Figure 2

                                    3- On the Port Mirroring tab, click Add

Figure 3

4-Enter a Name and Description for the port mirroring session

Figure 4

5- Make sure that the Allow normal IO on destination ports checkbox is deselected If you do not select this option, mirrored traffic will be allowed out on destination ports, but no traffic will

Be allowed in.

6-Click Next

7- Choose whether to use this source for Ingress or Egress traffic, or choose Ingress/Egress to use this source for both types of traffic.

8-Type the source port IDs and click >> to add the sources to the port mirroring session.

9- Click Next.

Figure 5

 

10- Choose the Destination type port ID.

 

11- Type the destination port IDs and click >> to add the destination to the port mirroring session

12- Click Next

13- Verify that the listed name and settings for the new port mirroring session are correct

14- Click Enable this port mirroring session to start the port mirroring session immediately.

15- Click Finish.

For this lab the traffic going to metaspoitable VM will be mirror to eth1 on Security Onion Server.  

Running sniffer on eth1 can confirm that the mirror configuration is working as it should be:

tcpdump –nni eth1

 

Figure 7

 

 

 

 

Testing Snort

The first test is fingerprinting the metaspoitable vm with nmap and snort detected this attempted successfully.

nmap –O 192.168.207.20 

figure 8

The second test is trying to brute forcing metaspoitable root password using hydra

hydra –l root –P passwords.txt 192.168.207.20 ftp

               Figure 9

The third attempt was using metasploit to exploit metaspoitable:

Figure 10


[1] https://isc.sans.edu/diary/Running+Snort+on+VMWare+ESXi/15899

[2] http://www.vmware.com/files/pdf/technology/cisco_vmware_virtualizing_the_datacenter.pdf

 

I will be teaching next: Intrusion Detection In-Depth - SANS London July 2019

Johannes

3561 Posts
ISC Handler
The vDS port mirroring approach is good for capturing traffic from a select few virtual machines for debugging purposes.

It's not very fit for monitoring the traffic being received by /many/ of the virtual machines in the environment though,
because you have to specify all these source ports to mirror manually; and therefore, update them when creating new VMs or changing the networking on a VM; easy to make an error here that results in something going unmonitored...

Therefore, the 3rd party commercial solutions that facilitate tapping the inter-VM traffic are worth considering.
Mysid

146 Posts
If you are missing the dvSwich feature (the free version of ESXi), this can be quite complex. This topic came up yesterday in #vmware, and a given solution is to provide routing back to "a gateway VM" where your probes, etc, sit. This isn't great and it might be better to actually drop some cash on a cheap physical switch or even a physical hub to replicate traffic to your probe (which lives on it's own vSwitch, which is bound to it's own port).

Infosanity covered an additional method of making your vSwitch a "vHub" previously: http://blog.infosanity.co.uk/2011/05/20/network-sniffing-in-vmware-esxi/
mbrownnyc

19 Posts
Hi, thanks for this wonderful notes. I'm stuck in setting up source port IDs and destination port IDs.

source port IDs - these are the port ID listed against VM host servers and can be found from vDistibuted Switch --> 'Ports' tab?

destination port IDs - Is it the port ID assigned against Security Onion vm as Connectee?

Thanks in advance
Mil10
mil10

1 Posts
Thanks!
mil10
2 Posts
hi?i want to know how to set port mirroring in API,if you tell me , i will thank you very much
unknown

1 Posts

Sign Up for Free or Log In to start participating in the conversation!